W50 SATTEL WITH HLS 100.02 V1.0 FS 17
It took a long time, a lot of work it cost but now he is ready that he comes to the DL.
Our HLS 100.02 incl. W50 saddle,
Thanks a lot again to the whole team of *** Ostmodding Freunde ***.
Everybody has contributed to get the HLS into play as it is now.
Have fun with the *** Ostmodding Freunde ***
Credits: DerRobi66, Sven (Adolf), CT-Chaostrooper, Steven85
Here is a short description of the quite extensive controls:
Description for HLS100-02:
– open tarpaulin -> N
– Liner left -> Ctrl left + NumPad 7
– Dropside rear -> Ctrl left + NumPad 8
– Right side wall -> Ctrl left + Numpad 9
– straps -> L
The following can be loaded.
– 12 large round bales (set to 1,30m)
– 14 square bales
– 6 large pallets
– 12 small pallets
– 222 HD bales e.g. the Welger 730
– Select load -> Y
– Switch on working mode -> X
– unloading side (likns + right + rear) -> B
– Move marking left / right ->, |.
– Mark on | off | start position -> J | N | M
– Unload -> Z
– Door left -> NumPad 7
– Door right -> Numpad 9
– Window left -> Ctrl + Numpad 7
– window on the right -> Ctrl + Numpad 9